It can be used on the interior or exterior, transports undesirable moisture out of window joints and is full-surface adhesive. The new joint adhesive tape from pro clima – CONTEGA SOLIDO IQ – will make the installation of windows easier and will provide protection against damage to structures. When installed on the inside, it is vapour-retarding and airtight; when used on the outside, it is resistant to driving rain, open to diffusion and windtight.
European Technical Assessment confirms high durability even under demanding conditions, as well as compatibility with DIN 68000-2
Long-term durability, even subject to extreme heat or cold: pro clima’s INTELLO and INTELLO PLUS airtight membranes are humidity-variable and very resilient. This has now been confirmed by independent technical testing by the German Institute for Construction Technology (DIBt).
“Our humidity-variable INTELLO and INTELLO PLUS vapour retarders, together with our DB+ product, were the first humidity-variable vapour retarders to receive national technical approval from the German Institute for Construction Technology (DIBt). These products have now been awarded approval in the European Technical Assessment (ETA). As a result, they now also have the required proof of durability demanded by DIN 68000-2 for vapour retarders with humidity-variable diffusion resistance,”
ays carpenter and construction engineer Michael Förster, head of Application Technology at pro clima.
Advantages of humidity-variable vapour retarders: Maximum reliability for built structures
The INTELLO and AEROSANA VISCONN airtightness systems are Passive House certified
Particularly energy-efficient, permanent adhesion and reliable performance – these are the requirements that pro clima demands of its construction materials. After all, good buildings that provide healthy indoor environments can only be achieved if the quality level of the construction components is right. pro clima has this quality level checked at regular intervals by independent external bodies.
New: the AEROSANA VISCONN sprayable sealant is Passive House certified
The Passive House Institute has now confirmed that the new humidity-variable AEROSANA VISCONN airtightness sealant also fulfils its strict criteria and achieves the highest efficiency class of phA. This spray-on or brush-on airtightness sealant is proving very popular among installation technicians as its saves time and can be used flexibly. Thanks to its humidity-variable sd value, it can be used both indoors and outdoors. It can cover cracks and joints of up to 3 mm in width. If the system fleece is also used, then larger joints can also be dealt with. Once it has dried, AEROSANA VISCONN is permanently elastic and very resilient. It can also be plastered over without any problems.
Planners and architects are including the new AEROSANA VISCONN in their construction projects because they know that spraying or painting on provides reliable sealing for challenging detailed features. In addition, the humidity-variable diffusion resistance also provides better protection for building components. Installation technicians appreciate the ease of installation and the time savings compared to working with adhesive tapes. In this way, a seamless, sealed airtightness layer can be achieved for walls, ceilings and floors in a time-saving manner.
With INTELLO, winter building sites are not a problem
With a hydrosafe value of over 2 m, INTELLO protects insulation structures reliably – even if there is a lot of building moisture present due to plastering and the installation of screed, for example. In addition, pro clima INTELLO is the first humidity-variable vapour retarder with European technical approval. There are a number of humidity-variable vapour retarders – Michael Förster (the head of Application Technology at pro clima) explains the differences between them in this video: